• TADC ADC Core Registers

TADC ADC Core Registers

Base address - 0x0300, address mask - 0x00FF.

Reg 0x0000 - Latency, R/W

Reg 0x0001 - Match window, R/W

Reg 0x0002 - reserved (for prewindow)

Reg 0x0003 - ADC Window (samples to readout), R/W

Reg 0x0004 - ADC channel memory depth, in kilosamples, RO

Reg 0x0005 - ADC mode, R/W

• [1:0] - '0' reserved, '1' normal, '2' baseline, '3' reserved
• [15:2] - reserved

Reg 0x0006 - Input Gain Control, R/W

• [0] - channels 1-2 gain: 0 - x1 gain, 1 - x4 gain
• [1] - channels 3-4 gain: 0 - x1 gain, 1 - x4 gain
• [2] - channels 5-6 gain: 0 - x1 gain, 1 - x4 gain
• [3] - channels 7-8 gain: 0 - x1 gain, 1 - x4 gain
• [4] - channels 9-10 gain: 0 - x1 gain, 1 - x4 gain
• [5] - channels 11-12 gain: 0 - x1 gain, 1 - x4 gain
• [6] - channels 13-14 gain: 0 - x1 gain, 1 - x4 gain
• [7] - channels 15-16 gain: 0 - x1 gain, 1 - x4 gain
• [15:8] - reserved

Reg 0x0007 - reserved

Reg 0x0008~0x000B - Channels enable (64-bits), R/W

Reg 0x0010 - ADC Build Param 1, RO

• [7:0] - reserved
• [15:8] - ADC Bits

Reg 0x0011 - ADC Build Param 2, RO

• [7:0] - ADC chips number
• [15:8] - ADC chip channel number

Reg 0x0012 - ADC Build Param 3, RO

• [7:0] - ADC channel ring buffer size (log2 value), in samples, defines max ADC latency
• [15:8] - ADC channel event data buffer size (log2 value), in samples, defines max ADC match window (half of this value)

Reg 0x0013 - ADC Build Param 4, RO

• reserved

Reg 0x0020 - ADC Pattern Test Control, R/W

• [0] - test enable (resets previous results, when started new test)
• [1] - pause test
• [15:2] - reserved

Reg 0x0021 - ADC Test Pattern, msb alligned, R/W

Reg 0x0024~0x0027 - number of checked ADC words, 64-bits, RO

Reg 0x0028~0x002F - Mask of failed channels, 128-bits, RO

• Bit number == channel number, set if ADC word not equal to test pattern

Reg 0x0040~0x0043 - ADC hfifo overflow (64-bits), bit# = ch#, RO

Reg 0x0048~0x004B - ADC mfifo overflow (64-bits), bit# = ch#, RO

Reg 0x0050~0x0053 - ADC efifo overflow (64-bits), bit# = ch#, RO

Reg 0x0080~0x00FF - ADC Channel Data, one register per channel, data is msb alligned, RO

MLinkRegisters