PCI Digitizer, VME TDC, PCI VME Master, Data Acquisition System

VmeRegistersTqdc16

Last updated at 2016-05-18 09:56:22

TQDC-16 VME module registers, firmware v2.0

Previous version: Firmware v1.0

Hardware: TQDC-16

AM 0x29 (A16 D32) Registers
Reg	Address	Name	Access
0	0x0000	Control	R/W
1	0x0004	ADCSet0	R/W
2	0x0008	ADCSet1	R/W
3	0x000C	JTAG	R/W
4	0x0010	TRIGSet	R/W
5	0x0014	DACSet	R/W
6	0x0018	ADCLat	R/W
7	0x001C	factory test	R/W
8	0x0020	JTAG32	R/W
9	0x0024	Status	Read Only
10	0x0028	Compstate	Read Only
11	0x002C	ADC Window	R/W
12	0x0030	TQDC16VS gain control	R/W
unused
16	0x0040	Serial_ID_lo	Read Only
17	0x0044	Serial_ID_hi	Read Only
18	0x0048	Temperature_1	Read Only
unused
32	0x0080	ADC 0 data	Read Only
...
47	0x00BC	ADC 15 data	Read Only

AM 0x39 (A24 D32) Registers
Reg	Address	Name
0	0x000000	Trigger Logic RAM 0, word 0
...
7	0x00001C	Trigger Logic RAM 0, word 7
8	0x000020	Trigger Logic RAM 1, word 0
...
15	0x00003C	Trigger Logic RAM 1, word 7
200	0x000800	Counter0
...
215	0x00083C	Counter15

Supports base registers: Control, JTAG, JTAG32, Status, Serial_ID_1, Temperature_1.

Status register supports bits: 0, 2, 3.

Additional Registers

AM 0x29, A16 D32

Reg 1, @0x0004, ADCSet0, R/W

ADC device 0, channels 0..7

[9:0] search window
[14:10] match window
[15] input polarity (1=negative)
[23:16] channels 7:0 enable mask
[29:28] device number ('device' field in raw data), set to 1 set to 0
[31:30] mode

Reg 2, @0x0008, ADCSet1, R/W

ADC device 1, channels 8..15

[9:0] search window
[14:10] match window
[15] input polarity (1=negative)
[23:16] channels 15:8 enable mask
[29:28] device number ('device' field in raw data), set to 2 set to 0
[31:30] mode

Reg 4, @0x0010, TRIGSet, R/W

[3:0] hit matching width
[7:4] select channel A for ST trigger
[11:8] select channel B for ST trigger
[12] ST channel A enable
[13] ST channel B enable
[14] reserved
[15] 1 - AND matching, 0 - XOR matching (?)
[31:16] channels 15:0 enable mask for trigger logic

Reg 5, @0x0014, DACSet, R/W

[15:0] DAC data
[16] select: 0 - channels 7:0, 1 - channels 15:8
[17] LDAC (load command)

Reg 6, @0x0018, ADCLat, R/W

[31:0] ADC trigger latency, complementary code

Reg 10, @0x0028, Compstate, Read only

[15:0] input discriminator state

Reg 11, @0x002C, ADC Window, R/W

[31:0] ADC Window (approx 1.5us max)

Reg 32..Reg 47, @0x0080..@0x00BC, ADC instant data

[5:0] reserved 0
[15:6] ADC raw sample data
[31:16] reserved

VMEDAQ Registers

VmeRegistersTqdc16 (last edited 2016-05-18 09:56:22 by sav)