MTDC64 Test Report
Setup
Source: Signal generator Tektronix AFG-3252. Coaxial outputs connected with 15 cm 50 Ohm cable to home-made balun, then 2 metres of twisted ribbon cable to MTDC-64 board. Generator mode: pulses 10 ns width, 200 mV peak, 1kHz trigger. Delay on channel 1 set to zero, delay on channel 2 is varied. All times in nanoseconds.
delay |
RMS(t2-t1) |
0.0 |
50.1 |
1.0 |
44.1 |
2.0 |
48.9 |
3.0 |
62.8 |
4.0 |
45.3 |
5.0 |
37.8 |
6.0 |
64.1 |
7.0 |
68.0 |
8.0 |
38.1 |
9.0 |
36.2 |
10.0 |
66.2 |
11.0 |
57.5 |
12.0 |
48.7 |
13.0 |
48.3 |
14.0 |
47.7 |
15.0 |
50.0 |
16.0 |
51.5 |
17.0 |
52.4 |
18.0 |
52.8 |
19.0 |
53.1 |
20.0 |
51.8 |
21.0 |
52.1 |
22.0 |
51.7 |
23.0 |
50.6 |
24.0 |
49.0 |
25.0 |
51.4 |
INL correction file: mtdc64_inl.txt