FVME2
VME64x Master for Data Acquisition
|
FVME2 is VME64x Master with added capabilities for automatic readout of VME modules in chained mode (VME64xP extensions).
It is a component of VMEDAQ system.
Specifications
- 6U, VME64x Master
- VME System Controller
SFP serial link (2 Gbps M-Link)
TTC LVDS input for spill and trigger
FVME2 firmware
Custom designed firmware for automatic data acquisition within VMEDAQ system.
- Autodetect modules with CR/CSR access
- Programmed I/O: 32-bit register access
- Automatic Readout with CBLT (32-bit, 64-bit, 64-bit two edge)
- 100 MB/s sustained data transfer rate with VMEDAQ system (64-bit two edge 2eVME)
Front Panel Interfaces
TTC bus - LVDS input for spill and trigger
- TTC leds
- Ok - Normal operation, TTC bus connected
- Trig - Trigger signal is active
- Err - TTC error (no signal, parity error, protocol error)
- VME leds
- Run - VME subsystem is operating normally
- Act - Module is driving VME bus
- Err - Unexpected error on VME bus
- System leds
- red - System error
- orange - System is performing internal operations
- green - System is operating normally
- SFP link leds
- red - Link error
- orange - Link error
- green - Link is up, blinks on activity
- SFP serial link (2 Gbps M-Link)
Engineering Documentation
Flash Programming
