TQDC16VS-E Data Format

Hardware TQDC16VS-E

TQDC16VS-E payload data is encapsulated in M-Stream 2.2 protocol using Data Subtype 0.

M-Stream Header

word #

byte offset

bits

description

31:24

Device ID

23:18

Flags

17:16

Subtype

15:0

Fragment length

31:16

Fragment ID bits [15:0]

15:0

Fragment offset code

M-Stream Subtype 0, first fragment

31:0

Device Serial

31:24

reserved

23:0

Event number

31:0

Event timestamp, TAI seconds

31:2

Event timestamp, TAI nanoseconds

1:0

Event timestamp, TAI flags

31:0

Event Data

...

N-1

4*(N-1)

31:0

M-Stream Subtype 0, next fragments

31:0

Event Data

...

N-1

4*(N-1)

31:0

Event Data format

word #	byte offset	bits	description
0	0	31:0	Data Block #1 (S₁ bytes)
...
S₁/4-1	S₁-4	31:0
S₁/4	S₁	31:0	Data Block #2 (S₂ bytes)
...
(S₁+S₂)/4-1	S₁+S₂-4	31:0
...
Till the last data block
...

Data Block format

word #	byte offset	bits	description
0	0	31:28	Data Type
		27:24	Channel number
		23:16	reserved
		15:0	Data length (in bytes)
1	4	31:0	Data Payload
...
N-1	4*(N-1)	31:0

TDC Data Block

TDC data type is 0x0.
channel number field not used

TDC Data Payload

2 - TDC event header
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
2				reserved				Event number												TDC timestamp

TDC timestamp in number of 25 ns time intervals since global trigger timestamp found in event header.

3 - TDC event trailer
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
3				reserved				Event number												TDC word count

4 - TDC data, leading edge
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
4				reserved			channel				data

5 - TDC data, trailing edge
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
5				reserved			channel				data

TDC time measurement

data bits 20:2 = number of 100 ps time intervals since global trigger timestamp found in event header;
data bits 1:0 = rcdata[1:0].

6 - TDC error
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
6				reserved													TDC error flags

TDC error flags bits:

[0] Hit lost in group 0 from read-out fifo overflow
[1] Hit lost in group 0 from L1 buffer overflow
[2] Hit error have been detected in group 0
[3] Hit lost in group 1 from read-out fifo overflow
[4] Hit lost in group 1 from L1 buffer overflow
[5] Hit error have been detected in group 1
[6] Hit lost in group 2 from read-out fifo overflow
[7] Hit lost in group 2 from L1 buffer overflow
[8] Hit error have been detected in group 2
[9] Hit lost in group 3 from read-out fifo overflow
[10] Hit lost in group 3 from L1 buffer overflow
[11] Hit error have been detected in group 3
[12] Hits rejected because of programmed event size limit
[13] Event lost (trigger FIFO ovefrlow)
[14] Internal fatal chip error has been detected

Most important error bits are 12 and 13. Error bit 14 should be ignored.

For detailed description of TDC please refer to HPTDC manual.

ADC Data Block

ADC data type is 0x1.

Each ADC data block may include several signals. Each signal data starts with header followed by digitizer data.

ADC header
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
ADC data length in bytes																ADC Timestamp

ADC Data
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
Word N+1																Word N

If number of ADC words is odd, then bits [31:16] of last ADC data payload word should be 0x0000.

ADC data is left alligned.

RawData